SIKU Hybrid Cooling Vests offer continuous cooling and heat protection for professionals who need high-end industrial protective clothing for extreme heat situations. The SIKU hybrid cooling vest operates at high temperatures and at all humidity levels. Offering adequate temperatures, the SIKU hybrid vest is used in professional sports and where the body needs to be refrigerated for a long time.
How to activate SIKU hybrid cooling vests:
ACTIVATION WITH WATER
Soak the product in water for 1 to 2 minutes.
Gently squeeze out excess water, but DO NOT squeeze them!
You can wipe a waterproof liner (vest / headgear) with a towel before use.
It is also essential to wear SIKU vests over a T-shirt.
Waistcoats should be tightly gripped around you as this will greatly increase the cooling effect.
ACTIVATION With cooling cartridges
We use SIKU cooling vests by inserting cooling pads into the inner pockets of the vest.
It is also essential to wear TUAQ vests over a T-shirt.
Waistcoats should be tightly gripped around you as this will greatly increase the cooling effect.
Cooling cartridges - INUTEQ-PAC® technology
Our INUTEQ-PAC® Biomass Phase Renewable Material (PCM) Refrigeration Technology is made from plant-based materials. Our PCM biological origin is non-toxic, 100% biodegradable, poorly flammable, durable, reusable, 20% lighter than water and does not cause condensation.
We offer cooling cartridges for 5 different temperatures:
* 6.5 ° C / 44 ° F
* 15 ° C / 59 ° F
* 21 ° C / 70 ° F
* 24 ° C / 75 ° F
* 29 ° C / 84 ° F
The temperature of the refrigeration cartridge, however, depends on what temperature and how long we will be exposed to a certain temperature.
How to activate the INUTEQ-PAC® cooling cartridges:
The time required to fully activate the PCM depends on the INUTEQ-PAC® temperature and the cooling mode:
Ice water: about 20 minutes
Freezer: About 40 minutes
Refrigerator: About 60 minutes
Regardless of the mode of cooling, you can shorten the activation time of the cartridges by laying them flat in one layer instead of stacking on top of each other. If you put on the cartridge right after you take it out of the freezer, it may be uncomfortably cold. Therefore, we recommend that you wait at least 5 minutes for the cartridge to warm to a set temperature of 6.5 ° C (44 ° F), 15 ° C (59 ° F), 21 ° C (70 ° F), 24 ° C (75) ° F) or 29 ° C (84 ° F) depending on the PCM model you ordered. When the PCM reaches this temperature, it will remain at this temperature for hours.
During hot summer days, SIKU hybrid vests will keep you cool, just try it.