INUTEQ reflective cooling vest orange – XL
In stock
COOLING VEST AND EQUIPMENT
INUTEQ-H20® evaporative cooling products are lightweight and easy to (re)activate.
The product can be worn on many occasions: for work, sports and leisure. The products are designed to be worn in environments that are not extreme and perform best at low to medium humidity. The airflow rate around the body determines the cooling effect and duration. These products are not suitable for use in extreme environments where heat is generated by industrial activities and where the user must wear protective/airtight clothing, as they do not provide adequate protection against heat stress. For such conditions, we recommend our INUTEQ-PAC® cooling products.
How to activate INUTEQ-H2O® cooling products:
1. Soak the product in water for 1 to 2 minutes.
2. Gently squeeze out the excess water.
3. Before use, you may wipe the waterproof lining (vest/headgear) with a towel.
4. The product is ready to wear.
Caution: do not wring!
Cleaning instructions
Machine wash at 40°C (104°F) with mild detergents.
Air dry only, do not iron, tumble dry or dry clean.
Storage
When damp: if the product is not dry, do not store it indoors without ventilation for more than 12 hours. When dry: unlimited storage in cool and dry places.
Composition
Outer: 100% nylon
Core: INUTEQ-H2O® super-absorbing cooling fabric with antibacterial treatment Lining: 100% nylon
Vest panels: polyester mesh
Product features:
Unique cooling technology
Machine washable and antibacterial Easy to use
Lightweight, non-toxic and durable
Provides cooling up to 15°C / 59°F below ambient temperature
Offers 2 to 8 hours of cooling comfort, depending on temperature/airflow/humidity Category 1 PPE marking – for minimal risk only, according to Directive 89/686/EEC
INUTEQ-H2O® cooling fabric has been developed to provide up to 200 wet/dry (activation) cycles.
Water absorption will increase over time as INUTEQ-H2O® fibres interlock within the fabric structure. There may be a slight decrease in absorption during the first 10 wet/dry cycles, after which absorption will remain relatively stable. This is a normal process, and the fabric will continue to be very effective in water absorption, evaporation and cooling performance. Absorption is also influenced by garment care and water quality.
Country of origin China
REACH Declaration of Conformity
We, Inuteq B.V., hereby confirm that in the case of the product(s) named INUTEQ-H2O®, we always comply with the provisions of the REACH Regulation (1907/2006/EC) and that the product(s) fully comply with the relevant regulation.
REACH compliance means that all substances contained in this product:
• have already been registered and/or are registered by our company and/or our suppliers and/or
• are excluded from the regulation and/or
COOLING VEST AND EQUIPMENT
INUTEQ-H20® evaporative cooling products are lightweight and easy to (re)activate.
The product can be worn on many occasions: for work, sports and leisure. The products are designed to be worn in environments that are not extreme and perform best at low to medium humidity. The airflow rate around the body determines the cooling effect and duration. These products are not suitable for use in extreme environments where heat is generated by industrial activities and where the user must wear protective/airtight clothing, as they do not provide adequate protection against heat stress. For such conditions, we recommend our INUTEQ-PAC® cooling products.
How to activate INUTEQ-H2O® cooling products:
1. Soak the product in water for 1 to 2 minutes.
2. Gently squeeze out the excess water.
3. Before use, you may wipe the waterproof lining (vest/headgear) with a towel.
4. The product is ready to wear.
Caution: do not wring!
Cleaning instructions
Machine wash at 40°C (104°F) with mild detergents.
Air dry only, do not iron, tumble dry or dry clean.
Storage
When damp: if the product is not dry, do not store it indoors without ventilation for more than 12 hours. When dry: unlimited storage in cool and dry places.
Composition
Outer: 100% nylon
Core: INUTEQ-H2O® super-absorbing cooling fabric with antibacterial treatment Lining: 100% nylon
Vest panels: polyester mesh
Product features:
Unique cooling technology
Machine washable and antibacterial Easy to use
Lightweight, non-toxic and durable
Provides cooling up to 15°C / 59°F below ambient temperature
Offers 2 to 8 hours of cooling comfort, depending on temperature/airflow/humidity Category 1 PPE marking – for minimal risk only, according to Directive 89/686/EEC
INUTEQ-H2O® cooling fabric has been developed to provide up to 200 wet/dry (activation) cycles.
Water absorption will increase over time as INUTEQ-H2O® fibres interlock within the fabric structure. There may be a slight decrease in absorption during the first 10 wet/dry cycles, after which absorption will remain relatively stable. This is a normal process, and the fabric will continue to be very effective in water absorption, evaporation and cooling performance. Absorption is also influenced by garment care and water quality.
Country of origin China
REACH Declaration of Conformity
We, Inuteq B.V., hereby confirm that in the case of the product(s) named INUTEQ-H2O®, we always comply with the provisions of the REACH Regulation (1907/2006/EC) and that the product(s) fully comply with the relevant regulation.
REACH compliance means that all substances contained in this product:
• have already been registered and/or are registered by our company and/or our suppliers and/or
• are excluded from the regulation and/or
• are exempt from registration
